AFDEX Newsletter Q1 2022 > Newsletter

본문 바로가기

Newsletter

AFDEX Newsletter Q1 2022

페이지 정보

작성일posted on

Attached files

본문

1. AFDEX_V21 Release
2. AFDEX_V21 Improvements
    2.1 Gap Flow Control for 2D & 3D Simulation
    2.2 Improvement in Analysis using Binder
    2.3 3D Moment Save Feature
    2.4 3D Sticky Die Feature
    2.5 3D Roll Forming Simulation
    2.6 2D/3D Remeshing for Each Stage
    2.7 3D Shearing Analysis
    2.8 Multi Damage Model in a Single Project
    2.9 Quantified Brittle Fracture of Ductile Material
    2.10 Forming Instability Index
    2.11 Force Control in Shaft Clinching
    2.12 Bending Analysis with Flexible Mandrel
    2.13 Flow Stress Models at Room Temperature
    2.14 Flow Stress Models at Elevated Temperature
    2.15 Cladding Extrusion Process at Front End
    2.16 Motion Analysis of Die Unloading
    2.17 Gap Flow Control
    2.18 Die Structural Analysis of Plane Strain
    2.19 Addition of CFRP Constitutive Model
3. AFDEX_V21 GUI Improvements
    3.1 Import DXF file
    3.2 Useful Features for Post-processing
    3.3 Remeshing at Each Stage
    3.4 Automatic Step Size Control and Mesh Generation
    3.5 Legend Bar Enhancements
    3.6 Coordinate Transformation
    3.7 Improved Dialog for Inputting Coefficient of Friction and Heat Transfer of Dies
    3.8 2D Automated Process Setting for Workpieces / Dies Model
    3.9 3D Automated Process Setting for Workpieces / Dies Model
    3.10 AFDEX_SP New Features and Improvements
4. Notice
    4.1 APA Annual Webinar for AFDEX
    4.2 ICTP 2021
    4.3 MSAM 2021
    4.4 ATCx Mexico 2021
    4.5 APA Webinar in Japan
    4.6 SIAT 2021 EXPO in India
    4.7 IS-KSTP30
    4.8 JSOL CAE Forum 2021 online
Total - 1 pages 4 articles
Newsletter list
Search for article

WingsTower A1208, 12 Dongbu-ro 169beon-gil, Jinju-si, Gyeongnam-do, Republic of Korea, 52818

Copyright © 2005 by MFRC and GNU. All rights reserved.

TEL +82-55-755-7529 FAX +82-55-761-7529 MAIL [email protected]

▲ To the top