Comparison of forming load-stroke curves > Material identification

본문 바로가기

Material identification

Comparison of forming load-stroke curves

페이지 정보

작성일posted on


   Three typical materials, i.e., SCM435, ESW95 and ESW105 were studied to reveal their flow stress information which is one of material properties for plastic deformation simulation. It is interesting to note that SCM435 is a typical strain hardening material while ESW95 and ESW105, Energy Saver Wires, are of high-strength with negligible strain hardening capability. It is also noted that flow stress at the strain of 1.5 was predicted for SCM435.

WingsTower A1208, 12 Dongbu-ro 169beon-gil, Jinju-si, Gyeongnam-do, Republic of Korea, 52818

Copyright © 2005 by MFRC and GNU. All rights reserved.

TEL +82-55-755-7529 FAX +82-55-761-7529 MAIL [email protected]

▲ To the top